1/6Kyogre Amigurumi
Original design by @我哦ovo
A Kyogre amigurumi from Pokemon, with a blue-and-white body, a split tail fin, eight small white fin flaps and wire-shaped fins. All the red body markings are embroidered on afterwards and glued to hold their shape.
- Difficulty
- Advanced
- Hook
- 2.0mm
- Yarn
- 4-ply / fingering cotton
- Time
- 10-15 hours
Materials
- 4-ply cotton yarn in bright red, sapphire blue, pure white, black and golden yellowAmazon ↗
- 2.0mm hookAmazon ↗
- StuffingAmazon ↗
- Floral wire and shaping strips for the fins and tailAmazon ↗
- Fabric glueAmazon ↗
- Yarn needleAmazon ↗
As an Amazon Associate, Hooklore earns from qualifying purchases. Links open Amazon — a matching product or search results.
Stitches used: ch, sc, inc, dec, hdc, dc, sl st, MR
Kyogre Amigurumi — Main Body & Large Fin Hook: 2.0mm. Colours: bright red, sapphire blue, pure white, black, golden yellow (4-ply cotton). The markings on Kyogre's body are embroidered; glue the embroidery down as you go to hold the shape. All colour changes use the invisible / planned colour-change method. MAIN BODY (white + sapphire blue) Rnd 1: 2 sc, 4 sc, 2 sc (8) Rnd 2: 2 inc, 4 inc, 2 inc (16) Rnd 3: 2(sc, inc), 4(sc, inc), 2(sc, inc) (24) Rnd 4: 3 sc, inc, 2 sc, sc, inc, 2(3 sc, inc), 2 sc, sc, inc, 3 sc, inc (30) Rnds 5-6: 7 sc, 15 sc, 8 sc (30) Rnd 7: 7 sc, 3(2 sc, inc, 2 sc), 8 sc (33) Rnd 8: 7 sc, 3(5 sc, inc), 8 sc (36) Rnds 9-11: 7 sc, 21 sc, 8 sc (36) Rnd 12: 7 sc, 3(3 sc, inc, 3 sc), 8 sc (39) Rnd 13: 7 sc, 3(7 sc, inc), 8 sc (42) Rnd 14: 7 sc, 3(7 sc, dec), 8 sc (39) Rnd 15: 7 sc, 3(3 sc, dec, 3 sc), 8 sc (36) Rnds 16-17: 36 sc (36) Rnd 18: 7 sc, 3(5 sc, dec), 8 sc (33) Rnds 19-20: 33 sc (33) Rnd 21: 7 sc, (2 sc, dec, 2 sc), 8 sc (30) Rnds 22-24: 30 sc (30) Rnd 25: 5(2 sc, dec, 2 sc) (25) Rnds 26-27: 25 sc (25) Rnd 28: 5(3 sc, dec) (20) Rnds 29-30: 20 sc (20) Rnd 31: 5(sc, dec, sc) (15) Rnds 32-33: 15 sc (15) Rnd 34: 5(sc, dec) (10) Rnd 35: 10 sc (10) Rnd 36: 5 dec (5) LARGE FIN 1 (sapphire blue) Rnd 1: Ch 12, join into a ring (12) Rnd 2: 12 sc (12) Rnd 3: 4(sc, inc, sc) (16) Rnd 4: 16 sc (16) Rnd 5: 4(3 sc, inc) (20) Rnd 6: 20 sc (20) Rnd 7: 4(2 sc, inc, 2 sc) (24) Rnd 8: 4(5 sc, inc) (28) Rnd 9: 4(3 sc, inc, 3 sc) (32) Rnds 10-22: 32 sc (32) Finishing note: leave a long tail, flatten and seam, stuff lightly, insert a shaping wire/strip, and sew to the body between rows 14-15 and rows 18-19 (do not fold it flat against the body - leave a one-stitch gap down the middle).
Notes
Kyogre (Pokemon) amigurumi, page 1: body and the big side fin. 2.0mm hook, 4-ply cotton. All body markings are embroidered on afterwards and glued to hold their shape. Colour changes use the invisible pre-change method. Shaping strips/wire are inserted into the fins.
Kyogre Amigurumi — Small Fins, Tail Fin, Dorsal Fins & Pectoral Fins SMALL FIN 2 (make 8, pure white) Row 1: Ch 4 Row 2: Starting in 2nd ch from hook, 3 sc, turn (3) Rows 3-4: 3 sc (3) Note: sew these onto the large fin. TAIL FIN (sapphire blue) Rnd 1: 5 sc (5) Rnds 2-3: 5 sc (5) Rnd 4: Ch 1 and join to the first st, then 12 sc (12) Rnds 5-6: 12 sc (12) Rnd 7: 2(2 sc, dec, 2 sc) (10) Rnds 8-13: 10 sc (10) RIGHT SIDE Rnds 14-15: sc, 2 dec, sc, inc, sc, inc, sc (10) Rnd 16: sc, dec, sc, inc, sc, inc, sc, dec (10) Rnd 17: 4 sc, dec, dec, sc, 3 dec, sc, dec, 2 sc (14) Rnd 18: sc, 2 dec, 5 sc, 2 dec (10) Rnd 19: sc, dec, sc, inc, sc, inc, sc, dec (10) Rnds 20-21: hdc, hdc dec, sc, inc, sc, inc, sc, hdc dec (10) Rnd 22: 3 hdc, sc, 3 sl st, sc, 2 hdc (10) LEFT SIDE Rnds 14-15: sc, inc, sc, inc, 2 sc, 2 dec (10) Rnd 16: 2 sc, inc, sc, inc, sc, 2 dec (10) Rnd 17: 2 sc, dec, dec, sc, 3 dec, sc, dec, 4 sc (14) Rnd 18: 2 dec, 6 sc, 2 dec (10) Rnd 19: dec, sc, inc, sc, inc, dec, sc (10) Rnds 20-21: hdc dec, sc, inc, sc, inc, sc, hdc dec, hdc (10) Rnd 22: 2 hdc, sc, 3 sl st, sc, 3 hdc (10) Notes: fasten off after the first half, keep the yarn attached for the second. Insert shaping strips. Use the yellow decrease to join the two halves one stitch at a time - start at st 4 of the first half for the right side, and st 7 for the left. Push floral wire in between body rows 26-27 and 28-29 and sew in place. DORSAL FIN (make 2, sapphire blue) Rnd 1: 5 sc (5) Rnd 2: 5 sc (5) Rnd 3: inc, sc, hdc inc, sc, inc (8) Rnd 4: sc, inc, 4 hdc, inc, sc (10) Note: sew to the body between rows 19-20 and rows 23-24. PECTORAL FIN (make 2, pure white) Rnd 1: 5 sc (5) Rnd 2: sc, inc, sc, inc, sc (7) Note: sew to the body between rows 9-10 and rows 11-12.
Notes
Kyogre page 2: the eight white fin flaps, the split tail fin (worked as a left and a right half then joined), and the dorsal and pectoral fins, with exact sewing positions given by body row numbers. Floral wire is inserted into the tail for shaping.
Frequently asked questions
How are the body markings done?
They are not crocheted in. You embroider the red pattern over the finished body and glue the embroidery down as you go so the lines keep the shape you want.
How do the fins keep their shape?
Each fin is stuffed lightly and gets a shaping strip or floral wire inserted before it is sewn on. The tail has wire pushed in between body rows 26-27 and 28-29.
How is the tail fin constructed?
It splits into a left and a right half worked separately from round 14, then the two halves are joined stitch by stitch with yellow decreases - starting at stitch 4 on the right half and stitch 7 on the left.
What is the invisible colour change the chart keeps mentioning?
It is the planned or pre-change method: you complete the last stitch of a round with the new colour so the join does not show as a step. The chart asks for it on every colour change.
