1/6Mouse Family Amigurumi
Original design by @我哦ovo
A pair of chubby white mice with pale blue trousers — a big one and a little one — worked as separate heads and bodies with wired posable tails. Charted round by round in a table so every stitch count is spelled out.
- Difficulty
- Intermediate
- Hook
- 2.0mm (1.0mm and 0.7mm for small parts)
- Yarn
- 4-ply / sport
- Time
- 4-8 hours
Materials
- 4-ply cotton in pale blue, white and blackAmazon ↗
- 2.0mm, 1.0mm and 0.7mm hooksAmazon ↗
- 6mm safety eyesAmazon ↗
- Fibrefill stuffingAmazon ↗
- Craft wire for the tailsAmazon ↗
As an Amazon Associate, Hooklore earns from qualifying purchases. Links open Amazon — a matching product or search results.
Stitches used: ch, sc, hdc, dc, inc, dec, BLO, FLO
Mouse Family — Big Mouse Head and Upper Body Hooks: 2.0mm, 1.0mm and 0.7mm. Colours: 4-ply cotton in pale blue, white and black. Big Mouse Head (white) Rnd 1: 8 sc (8) Rnd 2: 8 inc (16) Rnd 3: 8× (sc, inc) (24) Rnd 4: 6× (3 sc, inc) (30) Rnd 5: 6× (2 sc, inc, 2 sc) (36) Rnd 6: 36 sc (36) Rnd 7: 6× (5 sc, inc) (42) Rnd 8: 42 sc (42) Rnd 9: 6× (3 sc, inc, 3 sc) (48) Rnd 10-11: 48 sc (48) Rnd 12: 6× (7 sc, inc) (54) Rnd 13: 6× (7 sc, dec) (48) Rnd 14: 48 sc (48) Rnd 15: 6× (3 sc, dec, 3 sc) (42) Rnd 16: 42 sc (42) Rnd 17: 6× (5 sc, dec) (36) Rnd 18: 6× (2 sc, dec, 2 sc) (30) Rnd 19: 6× (3 sc, dec) (24) Leave a long tail to sew the head to the body. Do not close the opening. Big Mouse Body with Legs (white and pale blue) Make two legs. Fasten off the first leg; keep the yarn attached to the second leg and join it to the first. Rnd 1: 6 sc (6) Rnd 2: 6 inc (12) Rnd 3: 12 sc in BLO (12) Rnd 4-5: 12 sc (12) Rnd 6: Ch 2, then 28 sc (28) Rnd 7: 2× (5 sc, inc), 2 sc, 2× (inc, 5 sc), 2 sc (32) Rnd 8-9: 32 sc (32) Rnd 10-11: 32 sc in pale blue (32) Rnd 12: 2× (5 sc, dec), 2 sc, (dec, 5 sc), 2 sc (28) Rnd 13: 28 sc in pale blue (28) Rnd 14: 9 sc pale blue, 2 sc, 17 sc pale blue (28) Rnd 15: 9 sc, 2 sc, sc, dec, 12 sc, dec (24) Use an invisible colour change. Keep the loops of the final round in white so the seam does not show when you sew the head on.
Notes
Two-mouse amigurumi set (Pokemon-inspired). Shorthand: x = sc, v = inc, a = dec, f = hdc, t = dc, w = 3 sc in one st. Red text on the original chart = pale blue yarn, black text = white yarn.
Mouse Family — Lower Body, Arms, Ears and Tail Body with Legs, blue on the bottom (pale blue and white) Make two legs. Fasten off the first leg; keep the yarn attached to the second leg and join it to the first. Rnd 1: 6 sc (6) Rnd 2: 6 inc (12) Rnd 3: 12 sc in BLO (12) Rnd 4-5: 12 sc (12) Rnd 6: Ch 2, then 28 sc (28) Rnd 7: 2× (5 sc, inc), 2 sc, (inc, 5 sc), 2 sc (32) Rnd 8-9: 19 sc, 2 sc, 11 sc (32) Rnd 10-11: 32 sc in white (32) Rnd 12: 2× (5 sc, dec), 2 sc, (dec, 5 sc), 2 sc (28) Rnd 13-14: 28 sc (28) Rnd 15: 12 sc, dec, 12 sc, dec (24) Arms (white) Row 1: Ch 4 (4) Row 2: Starting in the 2nd ch from hook: 2 sc, 3 sc in one st, sc, inc (8) Rnd 3: 3 sc, inc, 3 sc, inc (10) Rnd 4: 10 sc (10) Rnd 5 (left arm): 2 sc, (3 dc, ch), 7 sc (10) Rnd 5 (right arm): 7 sc, (3 dc, ch), 2 sc (10) After the 3 dc, pull the working loop through the first of those dc to close the little paw. Rnd 6: 10 sc (10) Rnd 7: 2× (3 sc, dec) (8) Rnd 8: 8 sc (8) Rnd 9: 2× (sc, dec, sc) (6) Leave a long tail, close the opening and sew the arm on. Ears (white) Row 1: 4 sc, do not join, turn (4) Row 2: inc, 2 dc-inc, inc (8) Row 3: sc, dc, inc, 2 dc-inc, dc, dc-inc, sc (12) Row 4: sc, inc, hdc, 2× (hdc, hdc-inc, hdc), inc, sc (16) Row 5: 2 sc, hdc, hdc-inc, 3 hdc, 2 hdc-inc, 3 hdc, hdc-inc, hdc, 2 sc (20) Leave a long tail. Sew each ear from between Rows 2-3 to between Rows 12-13 of the head. Tail (split the yarn to 2 strands, 1.0mm hook, white) Rnd 1: 5 sc (5) Rnd 2-25: 5 sc (5) Rnd 26: 5 inc (10) Rnd 27: 5× (sc, inc) (15) Rnd 28: 5× (sc, dec) (10) Rnd 29: 5 dec (5) Add a shaping wire and thread it in through the top of the tail. Finishing: 6mm safety eyes. Sew the nose at Row 13.
Notes
Continuation of the two-mouse set. Red text on the original chart = pale blue yarn, black text = white yarn; use an invisible colour change.
Mouse Family — Little Mouse Little Mouse Head (white) Rnd 1: 6 sc (6) Rnd 2: 6 inc (12) Rnd 3: 6× (sc, inc) (18) Rnd 4: 6× (sc, inc, sc) (24) Rnd 5: 24 sc (24) Rnd 6: 6× (3 sc, inc) (30) Rnd 7: 30 sc (30) Rnd 8: 6× (2 sc, inc, 2 sc) (36) Rnd 9: 36 sc (36) Rnd 10: 6× (2 sc, dec, 2 sc) (30) Rnd 11: 6× (3 sc, dec) (24) Rnd 12: 6× (sc, dec, sc) (18) Rnd 13: 6× (sc, dec) (12) Leave a long tail to sew the head to the body. Do not close the opening. Arms (make 2, white) — worked in together with the body Rnd 1: 5 sc (5) Rnd 2: 5 inc (10) Legs and Body (white) Make two legs. Fasten off the first leg; keep the yarn attached to the second leg and join it to the first. Rnd 1: 5 sc (5) Rnd 2: 5 inc (10) Rnd 3: 10 sc (10) Rnd 4-5: 20 sc (20) Rnd 6: 2 dec, dec, 4 dec, dec, 4 dec, dec, 4 dec, dec, 2 dec (20) — the highlighted decreases each join one body stitch to one arm stitch Rnd 7: 20 sc (20) Ears (white) Row 1: 4 sc, turn (4) Row 2: (sc, hdc), 2 hdc-inc, (hdc, sc) (8) Row 3: sc, (sc, hdc), hdc, 2 hdc-inc, hdc, (hdc, inc), sc (12) Sew each ear from between Rows 2-3 to between Rows 8-9 of the head. Eyes (black, split to 1 strand, 0.7mm hook) Rnd 1: 5 sc (5) Tail: wrap two strands of white yarn around a length of wire.
Notes
The smaller of the two mice. Three hook sizes are used: 2.0mm for the bodies, 1.0mm for the tail and 0.7mm for the eyes.
Frequently asked questions
What do the red and black rows in the chart mean?
Red text is the pale blue yarn and black text is white. Use an invisible colour change so the join does not show.
How are the legs and body worked?
Both legs are made first: fasten off the first leg, keep the yarn on the second, then join them and carry on around both to form the body in one piece.
Why leave the head open?
The head is not closed off — you leave a long tail and sew it straight onto the body, which gives a cleaner join than closing and then stitching.
How do I make the tail curl?
The tail is worked over 29 rounds with a split strand of yarn on a 1.0mm hook, then a wire is threaded in from the top so you can bend it into shape.